| |
| |
|
| |
|
|
|
|
|
| |
Axis Electrical Components Pvt. Ltd.,
Kandivali – Mumbai. |
• Antistatic / Aesthetics
Hygienic Self Leveling
joint less floor topping. |
• Industrial heavy duty flooring. |
• Protective Coatings. |
• Sealing of Cracks. |
• Bonding of old to new concrete. |
• Heavy machinery foundation grouting |
• Protective treatment against cavitations / erosion. |
• Rehabilitations of RCC Structures.
• Waterproofing |
| |
|
|
| |
|
| |
|
| |
|
| |
• Automotive Industry |
• Atomic Power Stations. |
• Food & Beverage Industry. |
• Pharmaceutical Industry. |
• Fertilizer & Steel Plants. |
• Paper & Pulp Mills. |
• Dust free area for technical rooms, Departmental stores / Malls, shops, Hotels, kitchens & Hospitals. |
• Electronics & Warehouse for light traffic area. |
• Hydraulic Structures (Dams, Bridges, Ports & Docks). |
• Office Entrances, Lobbies & Corridors, Swimming Pools, Water body & Jacuzzi. |
• Effluent Treatment & Sewerage Plants. |
|
|
|
| |
|
| |
|
| |
|
| |
|
Superdite® FOR INDUSTRIAL FLOORINGS
Floors are among the most highly stressed of all parts of a building. This applies particularly to industrial floors, which are usually subjected to severe mechanical stresses & often also to thermal stresses & chemical attack.
Superdite® epoxy resins have been specially formulated & are highly successful for flooring application. The typical characteristics of cured
epoxy resin formulations obtained are shown in the salient features paragraph at page No. 1
Superdite® based flooring compositions are divided in different types of flooring components like Sealants, Primer Coats, Mortar – Screeds, Self – Levelling floors compound & Solvent free thin surface coating etc. which are readily available and meet the performance expectation.
|
|
|
| |
|
| |
 |
| |
|
| |
|
| |
|
| |
| Mechanical Pre – Treatment : |
Chemical Pre- treatment : |
(Roughening, Abrading, Sandblasting) Surface should be free from laitance & dust, trace of grease, oil moisture. The concrete surface should be clean, dry & mechanically sound.
OR |
Chemical etching using 15% Hydrochloric acid solution should be employed. The Solution is brush applied over the surface literally & leave it as it is for 15 minutes. This is then washed off with plenty of water followed by thorough drying with hot air. Adhesion may be increased by careful surface preparation as per the above methods. |
| |
|
|
| |
|
| |
APPLICATION METHOD |
| |
| For Self Levelling & Thin – Aesthetics Floor Toppings |
For Industrial Heavy Duty Floor Toppings |
• Surface Preparation |
• Surface Preparation |
• Primer Coat |
• Primer Coat |
• Topcoat 500micron |
• 3-5mm thickness of mortar-screed |
• 1-2mm thickness |
• Seal coats |
|
• Topcoat 1-2mm thickness |
|
| |
|
| |
SYSTEMS |
| |
|
| |
|
| |
PHYSICAL PROPERTIES AFTER 7 DAYS CURING AT 30° C |
| |
|
Properties |
Units |
Mortar / Screed |
Self
Leveling |
Compressive Strength |
Kg / cm2 |
800-1000 |
600-800 |
Flexural Strength |
Kg / cm2 |
200-250 |
300-350 |
Coefficient of linear Thermal Expansion |
Kg / cm2 |
30-35 |
50-60 |
Specific Gravity |
g / ml |
2.00 |
1.8 |
Shrinkage |
Cm/cm |
0.0008 |
0.0008 |
Shear Strength |
Kg / cm2 |
80-100 |
80-100 |
|
| |
|
| |
|
IMPORTANT INSTRUCTIONS FOR APPLICATIONS
There are major factors governing the failure or success of a long lasting protection by coatings
• The Correct Surface Preparations.
• The Choice of suitable type of Materials & Systems.
• The Correct Coating Procedure.
Cleaning & Maintenance of Equipment :-
Tools & Mixing equipments are best cleaned immediately after use. Since the removal of cured resin is difficult & time consuming, we recommend the bulk of the resin be removed using a scraper & the remainder washed away completely using solvents such as toluene, xylene or acetone.
Handling Precautions :
Epoxy resin & hardener are chemicals & hygienic procedures should be followed while handling them. Direct contact of resin & hardener with the skin must be avoided, can cause irritation of the skin in sensitive persons if incorrectly handled.
|
|
| |
|
| |
We have professionally qualified technocrats guiding the contractors & applicators for the following jobs :- |
| |
|
1. |
Industrial heavy duty floor coating |
2. |
Aesthetic / Antistatic / Hygienic self –leveling joint less floor toppings |
3. |
Protective coating & waterproofing |
4. |
Solvent free epoxy chemical resistance coating & lining of storage tank, prilling towers, effluent treatment pits etc. |
5. |
Sealing of cracks & bonding of old to new concrete. |
6. |
Heavy machinery foundation grouting. |
7. |
Protective treatment against cavitations / erosion. |
8. |
Rehabilitation of RCC structures. |
| |
|
We have executed similar job with reputed establishment / companies successfully.
|
|
|
| |
|
| |
|
| |
|
|
