What is needed to make epoxy tumblers?

Along with at least three days, here’s a list of what you’ll need for your first tumbler:

  1. Stainless Steel Tumbler (I used a 20oz)
  2. Spray Paint.
  3. Painters Tape.
  4. Mod Podge.
  5. Silicone Brushes.
  6. Fine Glitter.
  7. Clear Coat Spray.
  8. Epoxy (Both A and B parts)

How long does it take for epoxy to dry on a tumbler?

Usually, it takes around 72 hours to fully cure the epoxy. Whatever the dry time, the resin should be allowed to fully cure before attempting to move or sand it.

Which epoxy is best for tumblers?

This are the Best Epoxy Resins for Tumblers

  • High Quality Epoxy Resin: Pro Marine ProArt Resin.
  • Review: Art N Glow Casting Resin.
  • Recommendable Epoxy Resin: Envirotex Lite.
  • Metal Tumblers.
  • Plastic Tumblers.
  • Glass & Ceramic Tumblers.
  • Preparation is Key.
  • Mixing and applying the Epoxy to your Tumbler.

How much epoxy do I need for a tumbler?

First, you will want to ensure that you allow any spray paint to cure for 36 hours before applying your resin. Second, you will want to add an mL of resin for every ounce of the tumbler (for example, mix 20 ml for a 20 oz tumbler and 30 ml for a 30 oz tumbler and so on) to ensure you have enough resin for your tumbler.

You might be interested:  How To Buff Out An Epoxy Countertop?

Can you seal a tumbler without epoxy?

Make sure to remove the tape before the Mod Podge dries! There you have it! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!

Will epoxy set in cold weather?

Some resin/hardener combinations are formulated to cure in temperatures as low as 35°F. However, simply using a hardener that cures in colder temperatures does not guarantee dependable bonds. Epoxy can be used at cold temperatures but must be handled and applied with techniques adapted to cold temperatures.

How long should a cup spin with epoxy?

Tumbler should be on a hand turner or cup turner. Apply epoxy, smoothing it up and down the tumbler while you rotate it slowly. See videos in post for full instructions. Continue rotating for 4-6 hours depending on temperature.

Why is my epoxy Cup still sticky?

Sticky resin is typically caused by inaccurate measuring or under mixing. Sticky, tacky resin: often caused by inaccurate measuring, not mixing thoroughly or by curing in cold temperatures. Try moving your piece to a warmer spot: if it doesn’t dry, re-pour with a fresh coat of resin.

Can you use any epoxy for tumblers?

Heat resistance: Choose heat resistant epoxy for tumblers. Normally, tumblers use epoxy resins that are cured with heat. Odor: Typically, it becomes difficult to work with resins that have a strong odor. Choose epoxy resins that are easier to work with.

You might be interested:  FAQ: Epoxy Fish Eyes?

What can I use instead of epoxy on tumblers?

Brite Tone – If you want ONE item to use instead of epoxy, this would be it. You want to use Brite tone on every single cup. It is the best quality top coat they have that once it is cured, is shinier and more durable than epoxy!.

What is better for tumblers epoxy or resin?

Metal Tumblers When using a metal tumbler, Stainless Steel is the best bet for applying resin to your tumbler. The Epoxy Resin adheres better to the Stainless Steel than any other metal and it does not need a coat of paint.

Do you have to seal vinyl on a tumbler?

I do not seal my vinyl on tumblers. Most vinyl manufacturers actually recommend that you don’t apply a sealer over the vinyl. The exception to this would be if you want to go through the process of sealing your tumbler with epoxy. This is usually done with glitter tumblers.

How long do you wait between epoxy coats?

After you pour the second coat of epoxy, it will look good as new! Depending on the epoxy you ‘ve chosen to work with, you ‘ll have to wait between 4 and 24 hours before applying your second coat. Be sure to read your directions very thoroughly before beginning your project.

Leave a Reply

Your email address will not be published. Required fields are marked *