How do you epoxy tumblers?

Instructions

  1. Wash tumbler.
  2. Apply tape to top (and bottom – optional).
  3. Spray paint the tumbler if needed. Let dry.
  4. Apply a layer of mod podge with long even strokes.
  5. Dump glitter all over while you are turning the tumbler so the mod podge is all covered.
  6. Remove tape.
  7. Let dry fully (over night).
  8. Time to epoxy.

What kind of epoxy is used for tumblers?

Heat resistance: Choose heat resistant epoxy for tumblers. Normally, tumblers use epoxy resins that are cured with heat. Odor: Typically, it becomes difficult to work with resins that have a strong odor. Choose epoxy resins that are easier to work with.

What is needed to make epoxy tumblers?

Along with at least three days, here’s a list of what you’ll need for your first tumbler:

  1. Stainless Steel Tumbler (I used a 20oz)
  2. Spray Paint.
  3. Painters Tape.
  4. Mod Podge.
  5. Silicone Brushes.
  6. Fine Glitter.
  7. Clear Coat Spray.
  8. Epoxy (Both A and B parts)

Can you make tumblers without epoxy?

Make sure to remove the tape before the Mod Podge dries! There you have it! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!

You might be interested:  Quick Answer: How Clean Does Concrete Need To Be Before Epoxy?

How many coats of epoxy do you put on a tumbler?

Whatever the project you ‘re working on, you ‘ll need several coats of epoxy resin and hardener. Most projects need between two and four. However many coats you ‘re planning on, you need to recoat at the right time and in the right way and ensure your surface is properly prepared.

Is it safe to epoxy acrylic tumblers?

And to get that pretty glass-like coating on our tumblers, we have to measure out an equal portion of both A side and B side and mix them together carefully ourselves. But once fully cured, epoxy is considered safe and is classified as a non-hazardous material.

Is it safe to drink from epoxy tumblers?

ArtResin has been deemed safe for food contact once it has cured, but please keep food or beverages well away from ArtResin in its pre-cured liquid form. ArtResin is NOT edible or potable in either liquid or cured form. The maximum temperature cured ArtResin can come in contact with is 120F or 50C.

How long do you turn epoxy tumbler?

Once the entire surface has been evenly covered, allow it to turn until it is dry to the touch, within 18-24 hours. Once dry, remove the tape and allow it to finish curing. At 72 hours, it will have fully cured.

Can you use a hair dryer on epoxy?

Can you use a hair dryer on epoxy? In short, YES a torch is the best tool to get rid of bubbles in epoxy resin. A hair dryer or heat gun doesn’t get hot enough to remove bubbles efficiently and can blow dust all over your wet resin.

You might be interested:  Readers ask: What Does Epoxy Not Stick To?

What can be used instead of epoxy?

Usually, hard plaster or concrete can be used as casting materials instead of epoxy resin.

Leave a Reply

Your email address will not be published. Required fields are marked *