- 1 What kind of epoxy do you use on glitter tumblers?
- 2 What can you use instead of epoxy for tumblers?
- 3 Can you make glitter tumblers without epoxy?
- 4 How many coats of epoxy do you put on a tumbler?
- 5 What is the best epoxy for tumblers?
- 6 Do you epoxy the bottom of tumblers?
- 7 What can I use in place of epoxy?
- 8 Can you use stickers on epoxy tumblers?
- 9 Is it safe to epoxy plastic tumblers?
- 10 How long does it take for epoxy to dry on a tumbler?
- 11 How long do you let glitter dry before epoxy?
- 12 Can you use Mod Podge instead of epoxy?
What kind of epoxy do you use on glitter tumblers?
How to Mix and Apply Epoxy to a Glitter Tumbler. If you’re wondering what kind of epoxy to use on tumblers, which is a common question from beginners – I used Amazing Clear Cast brand epoxy. It comes with both epoxy part that you will need to mix together. You can also get it as part of a full epoxy tumbler kit.
What can you use instead of epoxy for tumblers?
Are There Any Alternatives to Epoxy if You Want to Make Tumblers?
- Crystalac (a water-based polyeurethane)
- Clear Diamond Finish (a clear urethane)
- 2K Clear Glamour Clear Coat (a spray urethane)
Can you make glitter tumblers without epoxy?
Make sure to remove the tape before the Mod Podge dries! There you have it! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!
How many coats of epoxy do you put on a tumbler?
Whatever the project you ‘re working on, you ‘ll need several coats of epoxy resin and hardener. Most projects need between two and four. However many coats you ‘re planning on, you need to recoat at the right time and in the right way and ensure your surface is properly prepared.
What is the best epoxy for tumblers?
This are the Best Epoxy Resins for Tumblers
- High Quality Epoxy Resin: Pro Marine ProArt Resin.
- Review: Art N Glow Casting Resin.
- Recommendable Epoxy Resin: Envirotex Lite.
- Metal Tumblers.
- Plastic Tumblers.
- Glass & Ceramic Tumblers.
- Preparation is Key.
- Mixing and applying the Epoxy to your Tumbler.
Begin by pouring a small amount of epoxy on the bottom of your tumbler. Evenly coat the bottom and slowly bring your epoxy over the edge and down the side. If you feel your glove drag, you ‘re out of epoxy.
What can I use in place of epoxy?
Hard plaster or concrete can be good casting materials, and they’re cheaper than Milliput, Fimo or any resins. Definitely a good low cost material choice for larger pieces.
Can you use stickers on epoxy tumblers?
Yes, all of our custom stickers and custom labels are waterproof, dishwasher safe and can be used on tumblers. Click to see full answer. Also to know is, can you use stickers on epoxy tumblers? We recommend that you first glue down all your items with Elmer’s glue before using the epoxy so that they do not move.
Is it safe to epoxy plastic tumblers?
Epoxy resin does not adhere to plastic and can peel off in time. If your tumbler has a small amount of plastic on it, you can cover it with a plastic -compatible spray paint to give the resin something to hang onto.
How long does it take for epoxy to dry on a tumbler?
Usually, it takes around 72 hours to fully cure the epoxy. Whatever the dry time, the resin should be allowed to fully cure before attempting to move or sand it.
How long do you let glitter dry before epoxy?
Let the final layer of glitter dry for 2-3 hours. Optional: You may apply a spray-on sealer at this point. Follow your can’s directions. Begin by mixing your epoxy resin, following the box’s instructions.
Can you use Mod Podge instead of epoxy?
It works as a sealant to your projects, you can gluwork your project with some classic mod podge and then use the Super Gloss over the top. So it gives you a very shiny, clear finish that looks like epoxy.