What removes epoxy paint?

Soak a clean cloth or rag with acetone/nail polish remover and press it down on the hardened epoxy for several minutes until it softens. If you can’t rub it away with the cloth, use a plastic scraper to gently remove it. Paint thinner.

Does paint remover work on epoxy?

Since epoxy paint is strong and resistant to wear and tear, removing it with a typical paint thinner will not work. Working with a stripper that contains methylene chloride, also called dichloromethane, will work best for removing epoxy paint.

Is there a stripper for epoxy?

gatorb76- Jasco 1 qt. Premium Paint and Epoxy Remover is an extremely strong stripper that effectively removes paint, varnish, lacquer, shellac, epoxy, urethane, latex or any synthetic coating. It can be used on wood, metal, concrete and masonry.

Will muriatic acid remove epoxy?

Mix a wash of muriatic acid and water at a ratio of 12 oz. of acid to a single gallon of water. Apply the wash to the epoxy coating using a scrubbing brush and let it soak in for 15 minutes. It might be necessary to repeat the process several times to remove the epoxy coating completely.

You might be interested:  Question: How Long Does Epoxy Garage Floor Last?

Will acetone remove cured epoxy?

Gently rub the areas where epoxy needs to be removed with a clean, soft cloth dampened with an epoxy solvent, such as acetone. Keep the acetone in contact with the area to loosen the epoxy. Use enough acetone to soak into the surface a bit.

How do you remove hardened epoxy?

Method 1:

  1. Soak the metal with the epoxy glue on it in a container of rubbing alcohol (isopropyl) or an acetone-based nail polish remover.
  2. Unwrap the item and scrape off the loosened epoxy with a scraper.
  3. If you notice a bit of a haze is left after cleaning, wipe it away with paint thinner and a rag.

How do you remove dried epoxy drips?

The best way to remove dried epoxy resin drips is with a little elbow grease:

  1. use a heat gun to soften them and pop them off with a blade.
  2. sand them off with sandpaper or a sanding block.
  3. use a Dremel tool.

Does paint thinner ruin resin?

If you want the paint off NOW, lacquer thinner will do it. I’ve used it on resin and fiberglass with no damage. Soak a rag with thinner (wear gloves:$) and rub the paint off. Don’t use it on styrene, it’ll melt it.

How do you use paint and epoxy remover?


  1. Wear chemical-resistant gloves and chemical splash goggles.
  2. Pour into a metal container and apply with a paint brush to a small area (up to 9 sq ft).
  3. After 15 minutes, test scrape a small area to see if finish is ready for removal.

What is in Jasco paint remover?

This product contains methylene chloride and methanol. This product contains methanol which can cause intoxication and central nervous system depression. Methanol is metabolized to formic acid and formaldehyde.

You might be interested:  What Color Is Fiberglass Epoxy Resin?

Does anything dissolve epoxy?

Acetone can be effective on wood or concrete surfaces. It should loosen the epoxy, so you can peel it away easily. Use acetone only in well-ventilated areas and keep it away from any flammable objects. Use a heat gun.

How do you epoxy cured epoxy?

Can I put another coat of epoxy over cured epoxy? Yes. Since the epoxy has cured a chemical bond is not possible so what is called a mechanical bond is needed. This simply means that the cured epoxy has to be lightly sanded before the next coat is applied: the first coat should have a matt, almost white, surface.

Leave a Reply

Your email address will not be published. Required fields are marked *