- 1 What can I use as a mold for epoxy resin?
- 2 What can I use to make a mold for resin?
- 3 Can I use Vaseline as mold release?
- 4 What material does epoxy not stick to?
- 5 How do you keep resin from sticking to mold?
- 6 What is the best material for making a mold?
- 7 Can I make a resin mold out of hot glue?
- 8 Can I use baking molds for resin?
What can I use as a mold for epoxy resin?
A wide variety of things can be used as molds for resin.
- Step 1: Gather cookie cutters. As odd as it may seem, the best cookie cutters for this technique are metal.
- Step 3: Get Silly Putty. Yes, the kid’s toy Silly Putty.
- Step 4: Get resin.
What can I use to make a mold for resin?
Creating the Mold
- EasyMold Silicone Putty.
- EasyMold Silicone Rubber (Liquid)
- Mold Builder Liquid Latex Rubber.
Can I use Vaseline as mold release?
Petroleum jelly is a suitable mold release agent best suited for simple molds without fine details. The jelly thins when applied by hand, coating the mold material. If used on highly detailed molds, the petroleum jelly may be as thick as some of the fine details, resulting in lost details on your finished resin object.
What material does epoxy not stick to?
Epoxy resin adhesives will bond all woods, aluminum and glass well. It does not bond to Teflon, polyethylene, polypropylene, nylon, or Mylar. It bonds poorly to polyvinyl chloride, acrylic and polycarbonate plastics. The only way to tell if an epoxy will bond to a material is to try it.
How do you keep resin from sticking to mold?
- Mold release. We use mold release to keep resin from sticking to molds.
- Polyethylene plastics.
- Anything with a greasy surface.
- Polyethylene or polypropylene plastics.
- Painter’s tape of packing tape – either clear or brown masking tape.
- Wax paper, parchment paper or freezer paper.
What is the best material for making a mold?
Polyurethane and Polyester Resins– As mentioned in the previous section, silicone rubbers are generally the best option for casting these materials. Upwards of one hundred parts can be cast in these molds. If you only require 10-20 cast parts, then you might opt to use less-expensive polyurethane mold rubber.
Can I make a resin mold out of hot glue?
Since cold hot glue doesn’t stick to anything you won’t need to use any other form of mold release. Simply fill the mold with resin and cure it. I cured it in a UV tank that’s meant to cure SLA prints but sticking it in sunlight for a few hours, or under a UV light for 30 minutes works just as well.
Can I use baking molds for resin?
One thing to keep in mind is if a mold is made of silicone you can use it for resin! Which means baking molds are fare game… just be aware that most resin molds are glossy (which leaves your piece with a glossy shine to the front!) whereas baking molds often leave your piece matte.