What kind of epoxy do you use on glitter tumblers?

How to Mix and Apply Epoxy to a Glitter Tumbler. If you’re wondering what kind of epoxy to use on tumblers, which is a common question from beginners – I used Amazing Clear Cast brand epoxy. It comes with both epoxy part that you will need to mix together. You can also get it as part of a full epoxy tumbler kit.

Can you use spray epoxy on glitter tumbler?

To apply the glitter, you need an adhesive. Some folks like Mod Podge, others like spray adhesive. And, of course, you need the epoxy resin to seal your glitter tumblers. This is what will keep your glitter contained and protected on your tumbler!

How much epoxy Do I need to mix for a tumbler?

First, you will want to ensure that you allow any spray paint to cure for 36 hours before applying your resin. Second, you will want to add an mL of resin for every ounce of the tumbler (for example, mix 20 ml for a 20 oz tumbler and 30 ml for a 30 oz tumbler and so on) to ensure you have enough resin for your tumbler.

You might be interested:  Question: How To Epoxy A Bar Top?

Can you make glitter tumblers without epoxy?

Make sure to remove the tape before the Mod Podge dries! There you have it! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!

Do you epoxy the bottom of tumblers?

Begin by pouring a small amount of epoxy on the bottom of your tumbler. Evenly coat the bottom and slowly bring your epoxy over the edge and down the side. If you feel your glove drag, you ‘re out of epoxy.

Do you have to sand between coats of epoxy on tumbler?

Do you have to sand epoxy tumblers? Sand the entire piece evenly. It will look terrible when you finish sanding it, but don’t worry. After you pour the second coat of epoxy, it will look good as new!

How long does it take for epoxy to dry on a tumbler?

Usually, it takes around 72 hours to fully cure the epoxy. Whatever the dry time, the resin should be allowed to fully cure before attempting to move or sand it.

What is the best epoxy resin for tumblers?

This are the Best Epoxy Resins for Tumblers

  • High Quality Epoxy Resin: Pro Marine ProArt Resin.
  • Review: Art N Glow Casting Resin.
  • Recommendable Epoxy Resin: Envirotex Lite.
  • Metal Tumblers.
  • Plastic Tumblers.
  • Glass & Ceramic Tumblers.
  • Preparation is Key.
  • Mixing and applying the Epoxy to your Tumbler.
You might be interested:  Quick Answer: Famowood High Gloss Epoxy Resin Where To Buy?

Is it safe to epoxy plastic tumblers?

Epoxy resin does not adhere to plastic and can peel off in time. If your tumbler has a small amount of plastic on it, you can cover it with a plastic -compatible spray paint to give the resin something to hang onto.

What can you use instead of epoxy for tumblers?

Are There Any Alternatives to Epoxy if You Want to Make Tumblers?

  • Crystalac (a water-based polyeurethane)
  • Clear Diamond Finish (a clear urethane)
  • 2K Clear Glamour Clear Coat (a spray urethane)

What causes fisheyes in epoxy?

Substrate contamination is the most common problem that causes fish eyes and pin holes in epoxy seal coats. Dust, dirt, wax, silicones, even the oil from your fingers when touching the part prior to sealing with epoxy will deter epoxy resins from laying flat and curing with a perfectly smooth surface.

Leave a Reply

Your email address will not be published. Required fields are marked *