What can I use instead of epoxy for tumblers?

Are There Any Alternatives to Epoxy if You Want to Make Tumblers?

  • Crystalac (a water-based polyeurethane)
  • Clear Diamond Finish (a clear urethane)
  • 2K Clear Glamour Clear Coat (a spray urethane)

Can you make glitter tumblers without epoxy?

Make sure to remove the tape before the Mod Podge dries! There you have it! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!

What do you seal glitter tumblers with?

If your glitter tumbler looks like mine (he tried) when you ‘re done, don’t worry you can add more Mod Podge and glitter in a second round. Let the glitter and mod podge layer dry for several hours or even overnight. Now you ‘ll want to seal the glitter layer with Krylon Clear Coat Spray.

You might be interested:  Readers ask: How To Make Tumblers With Epoxy?

Can I use Mod Podge instead of epoxy?

It works as a sealant to your projects, you can gluwork your project with some classic mod podge and then use the Super Gloss over the top. So it gives you a very shiny, clear finish that looks like epoxy.

What can be used instead of epoxy?

Usually, hard plaster or concrete can be used as casting materials instead of epoxy resin.

What is the best epoxy to use for tumblers?

This are the Best Epoxy Resins for Tumblers

  • High Quality Epoxy Resin: Pro Marine ProArt Resin.
  • Review: Art N Glow Casting Resin.
  • Recommendable Epoxy Resin: Envirotex Lite.
  • Metal Tumblers.
  • Plastic Tumblers.
  • Glass & Ceramic Tumblers.
  • Preparation is Key.
  • Mixing and applying the Epoxy to your Tumbler.

What is a good sealer for glitter?

If you are going to seal the glitter, use a very clear and glossy spray like Krylon Triple Thick Glaze, or a crystal clear liquid like Envirotex Lite. Both of these sealers will protect your glitter indoors and outdoors.

Can you use spray epoxy on glitter tumbler?

To apply the glitter, you need an adhesive. Some folks like Mod Podge, others like spray adhesive. And, of course, you need the epoxy resin to seal your glitter tumblers. This is what will keep your glitter contained and protected on your tumbler!

How do you make glitter tumblers with epoxy?

Instructions

  1. Wash tumbler.
  2. Apply tape to top (and bottom – optional).
  3. Spray paint the tumbler if needed. Let dry.
  4. Apply a layer of mod podge with long even strokes.
  5. Dump glitter all over while you are turning the tumbler so the mod podge is all covered.
  6. Remove tape.
  7. Let dry fully (over night).
  8. Time to epoxy.
You might be interested:  Quick Answer: How To Paint Garage Floor With Epoxy Paint?

Can I use Mod Podge to seal glitter?

For sealing glitter on new projects: One option for sealing glitter with a decoupage medium is by mixing glitter directly into the Mod Podge! You can using any glitter thickness (chunky, fine, or ultra fine). Mix glitter with Mod Podge and brush it on to your project like paint. Allow to dry in between coats.

Is Mod Podge a sealer?

Mod Podge is an all-in-one, glue, sealer, and finish for long-lasting durability for all your projects.

How do you seal in glitter?

Other ways to seal glitter include using a pour-on resin or a clear spray sealant. The resin will protect your surface and basically embed the glitter to your project (like on a tabletop or tray). The clear spray will just add light protection.

How do you seal with epoxy?

  1. Sand the project.
  2. Remove all dust from the project with tack cloth.
  3. Place newspapers or a drop cloth underneath the project.
  4. Pour epoxy resin and hardener into a clean coffee can.
  5. Apply epoxy using a bristle brush.
  6. Check for runs or dry spots as you paint.
  7. Allow project to cure for 24 hours in a dust-free room.

Can you use Mod Podge on top of resin?

Cover the curing resin so dust does not ruin the finish. Use an inverted box for multiple items or cups for individual items, leaving space for air to circulate. To prevent discoloration, seal both sides and edges of the image with Mod Podge ® or Elmer’s® Glue-All®. Let adhesive dry completely before adding resin.

What works better than Mod Podge?

The verdict: you can use Elmer’s Glue to decoupage. The finish seems less shiny than Mod Podge, but I like it. A spray of clear laquer will help protect it, but you’ll still want to keep it out of the weather.

Leave a Reply

Your email address will not be published. Required fields are marked *