What kind of epoxy should I use for a table top?

Best Epoxy Resin for Casting the Tabletop

  • Best Value for Money: INCREDIBLE SOLUTIONS Pourable Plastic Clear Casting Resin.
  • Best Product Overall: STONE COAT Super Cast Resin Kit.
  • Best Product Overall: INCREDIBLE SOLUTIONS Table Top Epoxy Resin.
  • Best Value for Money: STONE COAT COUNTERTOPS Epoxy Kit.
  • Resin Tabletop Polishing.

How much does epoxy countertop cost?

If it’s a wood or concrete countertop, you will need to seal the surface with a clear skim coat of epoxy. One quart will cover 60 square feet for one skim coat. To apply two coats, we would recommend a 2 quart kit as well as the epoxy you need for the color countertop pour.

Does epoxy scratch easily?

An epoxy coating will last longer than pretty much any other type of coating and epoxy coating by itself is scratch resistant due to the composition of its ingredients. In fact, you will find that epoxy flooring is not only resistant to scratches but it is extremely durable.

How much epoxy do I need for table top?

Most common table top and bar top epoxies provide approximately 12 sq feet per mixed gallon coverage at 1/8″ thickness.

You might be interested:  Readers ask: How To Cut Epoxy Resin Laboratory Countertops?

What is the best finish for table tops?

Best Finishes for Wood Kitchen Table in May, 2021

Finish Coverage (quart)
1 General Finishes Topcoat Editor’s Choice 100-125 sq ft
2 Minwax Fast Drying Poly 125 sq ft
3 Varathane Oil Poly up to 140 sq ft
4 General Finishes Enduro-Var 125 -150 sq ft

7

How do you seal wood before epoxy?

The Epoxy Resin sinks into the Wood For any porous surfaces such as wood, it is particularly important to seal the surface first. You do not need a separate product for this, rather you can simply apply a thin layer of resin to the wood and let it cure.

How do you seal an epoxy table top?

Table Seal Coat Steps:

  1. First, pour Low Viscosity Resin into cup and mix Slow Hardener at a 2:1 mix ratio by volume.
  2. Thoroughly mix resin and hardener for 2-3 minutes.
  3. Next, pour epoxy into larger knot, cracks or seams to start.
  4. Using a foam brush or squeegee, spread epoxy across surface evenly.
  5. Once surface is covered.

Are epoxy countertops worth it?

Yes — in some ways. When done right, epoxy countertops provide a long-lasting and durable surface. Their non-porous nature means they’re resistant to moisture. The material is also resistant enough to heat, although you still need to use common sense and not place hot pots and pans on it.

Is epoxy cheaper than granite?

Epoxy, compared to granite, offers a non-porous surface with high durability that promises longevity. It is also cheaper, starting from $45 per square foot. Granite costs (per square foot) are around $45 – $225.

You might be interested:  Question: How To Put Epoxy Coating On Painted Garage Floor?

Do epoxy cutting boards scratch?

Epoxy can break down over time with knife use and also chip and splinter when used as a butchering or medium to heavy cutting surface. Small particles could get into your food, and thus get into your digestive system.

How do you prepare wood for epoxy?

Before applying epoxy, sand smooth non-porous surfaces—thoroughly abrade the surface. 80-grit aluminum oxide paper will provide a good texture for the epoxy to “key” into. Be sure the surface to be bonded is solid. Remove any flaking, chalking, blistering, or old coating before sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *