- 1 What is needed to make epoxy tumblers?
- 2 What kind of epoxy is used for tumblers?
- 3 How much epoxy Do I need to mix for a tumbler?
- 4 Can you use a hair dryer on epoxy?
- 5 How long does it take for epoxy to dry on a tumbler?
- 6 Can you make glitter tumblers without epoxy?
- 7 Can you epoxy plastic tumblers?
- 8 What can be used instead of epoxy?
- 9 Is it safe to epoxy acrylic tumblers?
- 10 Do you have to sand between coats of epoxy on tumbler?
- 11 What causes fisheyes in epoxy?
What is needed to make epoxy tumblers?
Along with at least three days, here’s a list of what you’ll need for your first tumbler:
- Stainless Steel Tumbler (I used a 20oz)
- Spray Paint.
- Painters Tape.
- Mod Podge.
- Silicone Brushes.
- Fine Glitter.
- Clear Coat Spray.
- Epoxy (Both A and B parts)
What kind of epoxy is used for tumblers?
Heat resistance: Choose heat resistant epoxy for tumblers. Normally, tumblers use epoxy resins that are cured with heat. Odor: Typically, it becomes difficult to work with resins that have a strong odor. Choose epoxy resins that are easier to work with.
How much epoxy Do I need to mix for a tumbler?
First, you will want to ensure that you allow any spray paint to cure for 36 hours before applying your resin. Second, you will want to add an mL of resin for every ounce of the tumbler (for example, mix 20 ml for a 20 oz tumbler and 30 ml for a 30 oz tumbler and so on) to ensure you have enough resin for your tumbler.
Can you use a hair dryer on epoxy?
Can you use a hair dryer on epoxy? In short, YES a torch is the best tool to get rid of bubbles in epoxy resin. A hair dryer or heat gun doesn’t get hot enough to remove bubbles efficiently and can blow dust all over your wet resin.
How long does it take for epoxy to dry on a tumbler?
Usually, it takes around 72 hours to fully cure the epoxy. Whatever the dry time, the resin should be allowed to fully cure before attempting to move or sand it.
Can you make glitter tumblers without epoxy?
Make sure to remove the tape before the Mod Podge dries! There you have it! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!
Can you epoxy plastic tumblers?
Can you do Epoxy on plastic tumblers? Epoxy resin does not adhere to plastic and can peel off in time. If your tumbler has a small amount of plastic on it, you can cover it with a plastic -compatible spray paint to give the resin something to hang onto.
What can be used instead of epoxy?
Usually, hard plaster or concrete can be used as casting materials instead of epoxy resin.
Is it safe to epoxy acrylic tumblers?
And to get that pretty glass-like coating on our tumblers, we have to measure out an equal portion of both A side and B side and mix them together carefully ourselves. But once fully cured, epoxy is considered safe and is classified as a non-hazardous material.
Do you have to sand between coats of epoxy on tumbler?
Do you have to sand epoxy tumblers? Sand the entire piece evenly. It will look terrible when you finish sanding it, but don’t worry. After you pour the second coat of epoxy, it will look good as new!
What causes fisheyes in epoxy?
Substrate contamination is the most common problem that causes fish eyes and pin holes in epoxy seal coats. Dust, dirt, wax, silicones, even the oil from your fingers when touching the part prior to sealing with epoxy will deter epoxy resins from laying flat and curing with a perfectly smooth surface.