Where can I buy West Systems epoxy?

Readily Available at Local Marine & Hardware Stores WEST SYSTEM Products are available at fine marine chandleries and hardware stores worldwide.

How much is West System epoxy?

Price List

PRODUCT NUMBER DESCRIPTION PRICE
655-8 G/flex Epoxy Adhesive 28.78
655-2QT G/flex Epoxy Adhesive 114.16
655-2G G/flex Epoxy Adhesive 386.72
655-CR G/flex Epoxy Adhesive Resin 613.25

86

How strong is West System epoxy?

Compare Epoxy Physical Properties
Hardness @ 2 weeks (Shore D) 83 75
Compression Yield @ 2 weeks (PSI) 11,418 5,268
Tensile Strength (PSI) 7,846 3,440
Tensile Elongation (%) 3.4 32.7

12

How much West epoxy do I need?

Estimating epoxy quantity and coverage For a sealer coat, figure 40 square feet per pound of mixed material. For a typical “flow coat” over a sealed surface, about 1/8″ thick, figure 0.75 pounds per square foot (a Group size A 105 Resin /207 Special Clear Hardener weighs 3.11 lb).

How long does West System epoxy take to cure?

#205 Fast Hardener, mixed at a 5:1 ratio with #105 Resin, results in a pot life of 9-12 minutes at 72°F, with solid cure in 6-8 hours.

You might be interested:  Question: How To Abrade New Metal Before Epoxy Primer?

Is West System epoxy waterproof?

But since WEST SYSTEM Epoxy is very strong and an excellent adhesive, it strengthens the wood and makes it waterproof.

Does West System epoxy dry clear?

An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. 105/207 cures clear and colorless.

Is epoxy a resin?

Epoxy refers to any of the basic components or cured end products of epoxy resins, as well as a colloquial name for the epoxide functional group. Epoxy resins, also known as polyepoxides, are a class of reactive prepolymers and polymers which contain epoxide groups.

How thick can I pour West System epoxy?

While it is a slower curing system, it still should not be poured more than ¼” deep at a time. We have found that building up castings ¼” at a time allows the epoxy to cure without overheating.

What happens if you add too much hardener to epoxy?

Adding too much of either resin or hardener will alter the chemical reaction and the mixture will not cure properly.

Will epoxy set in cold weather?

Some resin/hardener combinations are formulated to cure in temperatures as low as 35°F. However, simply using a hardener that cures in colder temperatures does not guarantee dependable bonds. Epoxy can be used at cold temperatures but must be handled and applied with techniques adapted to cold temperatures.

How much will a gallon of epoxy cover?

How much will a gallon of floor coating cover? Based on a perfectly flat surface, 1 gallon of 100% solids epoxy floor coating will cover 1600 sq. ft. at 1 mil thick.

You might be interested:  Often asked: How To Get Epoxy Off Of Glass Lenses?

How do I calculate how much epoxy I need?

For a round surface, you will need to measure the diameter. Divide the diameter by 2 to calculate the radius. To calculate volume in cubic inches: (radius squared) X pi (or, 3.14159265) x (desired epoxy coating thickness). Divide by 1.805 to convert cubic inch volume to US fluid ounces.

Is epoxy resin permanent?

Epoxy glue is long-lasting, designed to create permanent bonding. So naturally, it’s not the easiest substance to remove so you should take care when applying the epoxy adhesive.

Leave a Reply

Your email address will not be published. Required fields are marked *